Aastra DT390 User's Guide download pdf (Page 7)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

• Creating DECT extensions (including authorization codes and the IPEI codes of the

handsets) in the PBX.

• Subscribing the handsets to the PBX, using the authorization codes and, if

applicable, the PARK code.

• Adding the handsets in CPDM3 using one of the following procedures:

- New handset, new number

- New handset, existing number

- Existing handset, new number

- Several new handsets, new numbers

• Configuring the handsets, manually or using a template.

3.3.1 New Handset, New Number

Adding a new handset with a new number in a DECT system comprises the following

steps:

1 Create a DECT extension (including an authorization code and the IPEI code of

the handset) in the PBX.

2 From the handset, subscribe the handset to the PBX using the authorization

code of the created DECT extension.

After subscription the handset is ready for making and receiving calls. To be able to

manage handset settings and firmware using CPDM3, the handset must be added in

CPDM3.

3 Open CPDM3 and Device Manager.

4 Place the handset in a desktop or rack charger connected to CPDM3 over the

LAN. The Found new hardware wizard is opened. (For information on how to

connect chargers to CPDM3, see “t.Adding a Charger in CPDM3” on page 4.)

5 In the wizard, select "Do nothing" and click OK.

6 Open the “Devices” tab and verify that the handset is online.

7 Right-click the handset and select “Assign number”. (Assigning a number to a

handset is a one-step procedure for both creating a number in CPDM3 and

associating a handset to this number).

8 In the “Assign number to device” dialog box, enter the directory number of the

DECT extension created in step 1. (Even though CPDM3 is not a part of the

communication between the handset and the PBX, it is highly recommended that

the handset number in CPDM3 corresponds to the directory number of the

DECT extension created for the handset. If not, the handset will be displayed

using different numbers in CPDM3 and the PBX.)

9 Configure the handset. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.3.2 New Handset, Existing Number

When adding a new handset to an existing number in a DECT system, an existing

DECT extension in the PBX and handset number in CPDM3 is used.

Adding a new handset using an existing number comprises the following steps:

1 In the PBX, change the IPEI code for the existing DECT extension (or re-initiate

the DECT extension) so that it corresponds to the IPEI code of new handset.

2 From the handset, subscribe the handset to the PBX using the authorization

code of the created DECT extension.

3 Open CPDM3 and Device Manager.

1 2 3 4 5 6 7 8 9 10 11 12 ... 41 42

Comments to this Manuals

No comments

Aastra DT390 User's Guide Page 7

Comments to this Manuals

Related products and manuals for Telephones Aastra DT390