Aastra DT390 User's Guide download pdf (Page 29)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

5.24.1 Push Button Alarm

It is possible to configure how alarms shall be handled in a system. An alarm can be

activated by a user in two different ways:

• A single long press

• Multiple press

The following alarm types are handled:

• Push-button alarm

• Test alarm

In a template or Number in PDM/CPDM3, the parameters for activation are found at:

Alarm > Alarm on long press

Alarm > Alarm on multiple press

Parameters in the current version are:

• Alarm type for long press

Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used.

• Alarm type for multiple press

Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used.

•ALS

• Mode for automatic call after alarm

The call can be established in the following modes;

- Normal: the call is established as an ordinary call.

- Loudspeaking: the loudspeaker on the backside of the telephone is turned on.

See also 5.20 Alarm Settings on page 19 for additional parameter settings.

Information about the telephone’s location can also be sent along with an alarm, see

5.21 Base Station Location on page 25.

5.25 Sound Settings for Calls

It is possible to set ring volume and ring signal for calls.

5.25.1 Set Ring Volume

1 Select Settings > Sound and Alerts.

2 In the Ring Volume drop-down list, select the ring volume to be used.

5.25.2 Set Ring Signal

1 Select Settings > Sound and Alerts.

2 In the Internal Call, External Call, and Callback drop-down lists; select the ring

signal to be used for the incoming call, respectively.

Tip: It is possible to create own ring signals, see 5.25.3 Create Customized Ring

Signals

1.The ALS will not sound if an automatic call after alarm is established.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

No comments

Aastra DT390 User's Guide Page 29