Aastra DT390 User's Guide download pdf (Page 12)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

If needed, switch off the handset by pressing the On-Hook key.

2 Switch on the handset by pressing On-hook key.

3 Select language to be used by or press “Cancelf Cancel is pressed, the default

language (English) will be used. If Cancer n the File menu, select Import >

Packages.

4 The handset starts to search for IP-DECT systems and will subscribe to the

system when it is found.

During the subscription procedure, the handset‚User ID will automatically be set to the

same as the extension number. The User ID is used to identify the handset when it is

connected to WinPDM/Device Manager and will be visible in the Number column.

Tip: The User ID can be viewed in the handset by navigating to the menu:

Admin menu > Device info > User ID.

4 Maintenance

4.1 Definitions

In the replacement descriptions, the phones are defined as:

• “old phone” is the phone to be replaced, possibly damaged but still working

• “new phone” is the replacement phone that will get the settings used in the old

phone

4.2 Upgrade phone software

It is possible to upgrade or reinstall the software on a phone. When upgrading the

software of the phone, any data (for example, messages on a DT690) may be deleted.

See also Installation and Operation Manual, WinPDM, or Installation and Operation

Manual, CPDM3.

1 Open WinPDM or the Device Manager in the CPDM3.

2 Open the Devices tab and select the phone you want to upgrade/reinstall.

3 Make a right-click and click “Upgrade...”.

4 A list of software files with a “.bin” extension will be presented under “Available

software”. Select the desired software file and click “OK”.

4.2.1 Download times during upgrade of handset software

The software will now be downloaded to the handset. The following table shows the

approximately download times for handset when done over-the-air (OTA) in an IP-

DECT system, or via charger in a DECT system.

OTA via IPBS

DC4 Charger connected to Device

Manager via Ethernet

DC4 Charger connected to

PDM via USB.

approx. 25 min. approx. 9 min. 20 sec. approx. 9 min. 30 sec.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

No comments

Aastra DT390 User's Guide Page 12