Aastra DT390 User's Guide download pdf (Page 6)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

It is recommended to use the CPDM3 to install and maintain phones in a large system.

The reason is that it enables to install, upgrade and configure a large amount of phones

simultaneously. Another benefit is that the collection of the phones from the user is not

needed. They can be maintained while placed in network connected Desk PDM

Chargers on the users desks. Network connected Rack PDM Chargers can also be

used, or over the air in the case of IP-DECT.

WinPDM enables administration of phones inserted in a Desk PDMCharger or Rack

PDM Charger connected via USB to the administrator’s computer.

For WinPDM, see Installation and Operation Manual, WinPDM or Installation and

Operation Manual, CPDM3.

3.1 Preparing WinPDM or Device Manager for handling of DT69X/ 390

If the parameter definition file (.def) for the handset is not present in the WinPDM or

CPDM3, it can be added by following the procedure below. The parameter definition file

and software files are delivered as a package file with the extension .pkg. Note that

template files (.tpl) may also be included in a package file.

1 Open the WinPDM or the Device Manager.

2In the File menu, select Import > Packages.

3 Select the package and click "OK".

The package will imported and the files will be created; one definition file with the extension

.def and one software file with the extension .bin. Template files may also be created. File

extensions are further explained

File extensions are further explained in an appendix in Installation and Operation

Manual, WinPDM and Installation and Operation Manual, CPDM3.

3.2 t.Adding a Charger in CPDM3

A charger must be added in CPDM3 before handsets can be configured.

Follow the steps below to add a charger in CPDM3:

1 Open CPDM3 and Device Manager.

2 Connect a desktop or rack charger to the network. The Found new hardware

wizard is opened in CPDM3.

3 In the wizard, select "Store in database" and click OK.

4 The charger is now added in CPDM3. Since it is stored in the database, the

charger is visible in CPDM3 even when disconnected from the network.

5 Open the Numbers tab and double-click the charger.

6 Configure the charger

as mentioned in charger. 2.2.

3.3 Configuring Handsets in DECT Systems (Integrated DECT)

In a DECT system, each handset corresponds to a DECT extension in the PBX. The

handsets and PBX communicates using DECT base stations connected to the PBX.

Configuring handsets in a DECT system comprises the following steps:

1 2 3 4 5 6 7 8 9 10 11 ... 41 42

No comments

Aastra DT390 User's Guide Page 6