Aastra DT390 User's Guide download pdf (Page 8)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

4 Place the handset in a desktop or rack charger connected to CPDM3 over the

LAN. The Found new hardware wizard is opened.

5 In the wizard, select “Do nothing” and click OK.

6 Open the “Device” tab and verify that the handset is online.

7 Open the “Numbers” tab

8 In the list, select the number to associate with the handset.

9 On the Number menu, select “Associate with device...”.

10 Select the handset and click OK.

11 Configure the handset. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.3.3 Existing Handset, New Number

When adding a new number to an existing handset in a DECT system, a new DECT

extension in the PBX and handset number in CPDM3 is created.

Adding a new number to an existing handset comprises the following steps:

1 Create a DECT extension (including an authorization code and the IPEI code of

the handset) in the PBX.

2 Open CPDM3 and Device Manager.

3 Place the handset in a desktop or rack charger connected to CPDM3 over the

LAN. The Found new hardware wizard is opened.

4 In the wizard, select “Do nothing” and click OK.

5 Open the “Device” tab and verify that the handset is online.

6 Open the “Numbers” tab.

7 Create a new number in CPDM3 (it is highly recommended to use the same

number as the created DECT extension). For more information, see “Create

New numbers”.

8 In the list of available numbers, select the created number.

9 On the Number menu, select “Associate with device...”.

10 Select the handset and click OK.

11 Configure the handset. For information on how to configure handsets, see

Configuration Manual, DT69X/DT390.

3.3.4 Several New Handsets, New Numbers

When adding several new handsets with new numbers in a DECT system, the

procedure in CPDM3 can be simplyfied by adding a range of numbers and then

associating the numbers with a selection of handsets.

Adding several new handsets with new number comprises the following steps:

1 Create a range of DECT extensions (including authorization codes and the IPEI

codes of the handsets) in the PBX.

2 From the handsets, subscribe the handsets to the PBX.

3 Open CPDM3 and Device Manager.

4 Place the handsets in a desktop or rack charger connected to CPDM3 over the

LAN. The Found new hardware wizard is opened.

5 In the wizard, select “Do nothing” and click OK.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

Comments to this Manuals

No comments

Aastra DT390 User's Guide Page 8

Comments to this Manuals

Related products and manuals for Telephones Aastra DT390