Aastra DT390 User's Guide download pdf (Page 11)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

7 Create a new number in CPDM3 (it is highly recommended to use the same

number as the created IP extension). For more information, see “Create New

Numbers” on page 55.

8 In the list of available numbers, select the created number.

9 On the Number menu, select “Associate with device...”.

10 Select the handset and click OK.

11 Configure the handset. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.4.4 Several New Handsets, New Numbers

When adding several new handsets with new numbers in an IP DECT (SIP) system,

the procedure in CPDM3 can be simplified by adding a range of numbers and then

associating the numbers with a list of handsets.

Adding several new handsets with new number comprises the following steps:

1 Create IP extensions in the PBX.

2 In the IP DECT base station user interface, add new users including numbers

that equals the directory numbers of the created IP extensions, IPEI codes for

the users’ handsets, and authorization codes. For information on how to add

users in IP DECT base stations, see IP DECT Base Station, Installation and

Operational Manual.

3 From the handsets, subscribe the handsets to the IP DECT base station using

the authorization codes created in step 2.

4 Open CPDM3 and Device Manager.

5 Place the handsets in a desktop or rack charger connected to CPDM3. The

Found new hardware wizard is opened.

6 In the wizard, select “Do nothing” and click OK.

7 In CPDM3, create a set of numbers according to “Create New Numbers” in

Installation and Operation Manual, CPDM3.

8 Associate the numbers with the handsets according to “Create New Numbers” in

Installation and Operation Manual, CPDM3.

9 Configure the handsets. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.4.5 Handset Installation in IP-DECT System using Easy Registration

A handset can subscribe to an IP-DECT system automatically if the following are

fulfilled:

• The IP-DECT system is configured for Easy Registration, see the Installation and

Operational Manual for your IP-DECT system.

• The handset extension number and IPEI are registered in the IP-DECT system, see

the Installation and Operational Manual for your IP-DECT system.

• The handset is not subscribed to any systems.

• The handset software is version 3.5.6 or higher.

Select the package and click “OK”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comments to this Manuals

No comments

Aastra DT390 User's Guide Page 11

Comments to this Manuals

Related products and manuals for Telephones Aastra DT390