Aastra DT390 User's Guide download pdf (Page 9)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

6 Open the “Device” tab and verify that the handset is online.

7 Create a set of numbers, see “ Create New Numbers”, in Installation and

Operation Manual, CPDM3.

8 Associate the numbers with the handsets according to “Associate Numbers with

a device” in Installation and Operation Manual, CPDM3

9 Configure the handsets. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.4 Configuring Handsets in IP DECT (SIP) Systems

In an IP DECT (SIP) system, each handset corresponds to an IP extension in the PBX.

The handsets and PBX communicates using IP DECT base stations connected to the

PBX oven the LAN.

Configuring handsets in an IP DECT (SIP) system comprises the following steps:

• Creating IP extensions in the PBX.

• Creating users (including authorization codes and the IPEI codes of the handsets)

using the user interface of the IP DECT base station.

• Subscribing the handsets to the PBX, using the authorization and PARK codes.

• Adding the handsets in CPDM3 using one of the following procedures:

- New handset, new number

- New handset, existing number

- Existing handset, new number

- Several new handsets, new numbers

• Configuring the handsets, manually or using a template.

3.4.1 New Handset, New Number

When adding a new handset with a new number in an IP DECT (SIP) system, an IP

extension in the PBX, a user in the IP DECT user interface, and a handset number in

CPDM3 is created.

Adding a new handset with a new number in an IP DECT (SIP) system comprises the

following steps:

1 Create an IP extension in the PBX.

2 In the IP DECT base station user interface, add a new user including a number

that equals the directory number of the created IP extension, an IPEI code for

the user’s handset, and an authorization code. For information on how to add

users in IP DECT base stations, see Installation and Operational Manual, IP

DECT Base Station.

3 From the handset, subscribe the handset to the IP DECT base station using the

authorization code created in step 2.

After subscription the handset is ready for making and receiving calls. To be able to

manage handset settings and firmware using CPDM3, the handset must be added in

CPDM3.

4 Open CPDM3 and Device Manager.

5 Place the handset in a desktop or rack charger connected to CPDM3 over the

LAN.The Found new hardware wizard is opened.

6 In the wizard, select “Do nothing” and click OK.

7 Open the “Device” tab and verify that the handset is online.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Comments to this Manuals

No comments

Aastra DT390 User's Guide Page 9

Comments to this Manuals

Related products and manuals for Telephones Aastra DT390