Aastra DT390 User's Guide download pdf (Page 34)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

The default setting is "microphone on a boom", which means that the audio is

optimized for using a headset with microphone on a boom. The headset profile can be

changed in the phone menu or in a template/Number via WinPDM/CPDM3 in:

Connections > Headset > Headset type

If the preconfigured headset profiles does not match the headset or the audio

performance is bad, it is possible to configure a headset profile. In WinPDM/CPDM3,

this is done under:

Connections > Headset > Headset type > User headset profile

When a name has been configured for the profile it will be visible and selectable in the

phone menu.

The following parameters can be set:

• microphone gain

• speaker gain

Note: Changing these parameters may result in a very high sound level which can

cause hearing damage.

Note: Changing these parameters may result in lower sound quality such as noise and

echo. If the audio problems occur, it is noticable for the person listening on the

conversation. Evaluate carefully before applying.

5.31 Owner identification in the idle display.

It is possible to add owner identification in standby mode of the phone. In a template or

Number in WinPDM/CPDM3, the parameter is found at:

Settings > Owner ID

Note: It is also possible to configure the Owner ID via the phone menu. See User

Manual, Cordless Phone DT690/DT692 with Bluetooth.

5.32 Profiles

Note: This feature is included in DT690 and DT692 only

It is possible to set up an own profile for incoming calls, message alerts, vibrating

alerts, key sound etc. This can be useful when there are many users on the same

phone, and they want different sound profiles. It can also be used for temporarily

settings, for example while in a meeting, incoming calls should be silent.

Profiles are configured via parameters in the "Profiles" folder.

Note: It is also possible to configure profiles via the phone menu. See User Manual,

Cordless Phones DT690 and DT692.

5.33 Shortcuts

Note: This feature is included in DT690 and DT692 only.

It is for example possible to define the soft key to make a call. It is for example possible

to define the soft key to make a call by selecting the Phone call function. When

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Aastra DT390 User's Guide Page 34