Aastra DT390 User's Guide download pdf (Page 10)

23/1531-ANF 901 43 C1 2013-01-04

Configuration Manual Cordless Phones DT69X/DT390

8 Right-click the handset and select “Assign number”. (Assigning a number to a

handset is a one-step procedure for both creating a number in CPDM3 and

associating a handset to this number).

9 In the “Assign number to device” dialog box, enter the directory number of the

DECT extension created in step 1. The function “Easy registration” as described

in Chapter 3.4.5 uses this number. It is therefore important that it corresponds to

a valid free number in MX-ONE Configure the handset. For information on how

to configure handsets, see “Phone Configuration” on page 15.

3.4.2 New Handset, Existing Number

When adding a new handset to an existing number in an IP DECT (SIP) system, an

existing IP DECT extension in the PBX and handset number in CPDM3 is used.

Adding a new handset using an existing number comprises the following steps:

1 In the IP DECT base station user interface, change the IPEI code for the number

so that it corresponds to the IPEI code of the new handset.

2 From the handset, subscribe the handset to the IP DECT base station using the

user’s authorization code (defined in the IP DECT base station).

3 Open CPDM3 and Device Manager.

4 Place the handset in a desktop or rack charger connected to CPDM3 over the

LAN. The Found new hardware wizard is opened.

5 In the wizard, select “Do nothing” and click OK.

6 Open the “Device” tab and verify that the handset is online.

7 Open the “Numbers” tab

8 In the list, select the number to associate with the handset.

9 On the Number menu, select “Associate with device...”.

10 Select the handset and click OK.

11 Configure the handset. For information on how to configure handsets, see

“Phone Configuration” on page 15.

3.4.3 Existing Handset, New Number

When adding a new number to an existing handset in an IP DECT (SIP) system, a new

IP DECT extension in the PBX and handset number in CPDM3 is created.

Adding a new number to an existing handset comprises the following steps:

1 Create an IP extension in the PBX.

2 In the IP DECT base station user interface, add a new user including a number

that equals the directory number of the created IP extension, an IPEI code for

the user’s handset, and an authorization code. For information on how to add

users in IP DECT base stations, see IP DECT Base Station, Installation and

Operational Manual.

3 From the handset, subscribe the handset to the IP DECT base station using the

authorization code created in step 2.

4 Open CPDM3 and Device Manager.

5 Place the handset in a desktop or rack charger connected to CPDM3. The

Found new hardware wizard is opened.

6 In the wizard, select “Do nothing” and click OK.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Comments to this Manuals

No comments

Aastra DT390 User's Guide Page 10

Comments to this Manuals

Related products and manuals for Telephones Aastra DT390