Line Keys, Programmable Keys, and Softkeys
41-001451-05 REV01 – 04.2014 51
You use the Aastra Web UI to set a key as a line.
Use the following procedure to set a key to function as a line. The procedure shows the softkey screens as an example.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Line to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Programmable Keys
7. Select from "Key 1" through "Key 6".
8. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
Expansion Module Keys
9. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
10. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
11. (M675i) In the "Label" field, enter a label to apply to this key.
12. Click Save Settings.
Comments to this Manuals