Aastra SIP-DECT User's Guide download pdf (Page 9)

Small SIP-DECT System Compendium: OM SIP – DECT Solution

8. Optional: if you want the RFP to access IP addresses in other LANs or on the

Internet, you need to add a router option (also called: default router or

standard gateway). Click the Add parameter button, select the Route

addresses entry, then click the Add button. Click the plus button below the list

and enter the router IP address in the Add list element dialogue.

9. Click the Send config. button. You should see a black sending ok message at

the bottom of the OpenMobility Configurator window.

10.Repeat the above steps to configure all RFPs. Alternatively, you can prepare a

text file that includes the configuration settings to automate the configuration

for a larger number of RFPs. Use the Configuration: Safe RFPs menu

command to create a template. Change the resulting text file – refer to the

OM System Manual for details. After this, use the Configuration: Safe RFPs

and Configuration: Run Config’s menu commands to send the configuration

to the RFPs.

>OM System Manual:

RFP LED Status

After clicking the Send config. button, the respective RFP restarts. During startup,

a current RFP loads the “iprfp3G.dnld” software file from your file server and

updates the software stored in the internal flash if a software change is detected.

An older RFP loads the “iprfp2G.tftp” software file from your TFTP server. Watch

the LEDs to verify the startup procedure.

Tip: You may verify the TFTP function, e.g. by entering “tftp -i 192.168.1.1 get

iprfp3G.dnld” or “tftp -i 192.168.1.1 get iprfp2G.tftp” on the Windows

command line.

Please note: If the RFP was operated within another SIP-DECT 4.0 system

previously, the user/password combination for the OM Configurator is

changed accordingly. If you do not know the login data, you need to

contact the Aastra support for an unlock token to regain access.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

Aastra SIP-DECT User's Guide Page 9