Aastra 470 User's Guide download pdf (Page 120)

Installation and first-time operation

120 eud-1282/1.0 – R1.0 – 12.2010

• Connecting the LAN cord (not included in the scope of delivery) to a LAN socket.

• Plug the connector at the loose end on the underside of the phone into the LAN

socket.

• Desk installation only: To relieve the strain on the cable feed the cable through one

of the cable guides on the stand rest.

Connecting your PC to the LAN

If required, you can connect your PC or another LAN device to the phone, for example

a printer.

• Connecting the LAN cord (not included in the scope of delivery) to the PC’s net-

work socket.

• Plug the connector at the loose end on the underside of the phone into the PC

socket.

• Desk installation only: To relieve the strain on the cable feed the cable through one

of the cable guides on the stand rest.

Connecting the power supply

If your LAN supports Power-Over-Ethernet (PoE), the phone will be powered via the

LAN cord and you will not require a power adapter.

If your LAN does not support PoE or if you have installed a switch between the LAN

and the phone that does not support PoE, you will need the optional power adapter

to power the phone.

• Plug the round connector of the power cord on the underside of the phone into

the power socket.

• Desk installation only: To relieve the strain on the cable feed the cable through one

of the cable guides on the stand rest.

• Connect the power supply to the mains.

Logging the IP phone

Your system administrator has to prepare the system before you can log on your

phone.

Note:

Only use the optional original plug-in power adapter.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 130 131

No comments

Aastra 470 User's Guide Page 120