
22 Enhanced Feature Adapter User Guide
Regulator y infor mation
aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near
a swimming pool.
5. Do not place this product on an unstable
cart, stand or table. The product may fall,
causing serious damage to the product.
6. This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in installation
unless proper ventilation is provided.
7. Do not allow anything to rest on the power
cord. Do not locate this product where the cord
will be abused by persons walking on it.
8. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
9. Never spill liquid of any kind on the
product.
10. To reduce the risk of electric shock do not
disassemble this product, but have it sent to a
qualified service person when some service or
repair work is required.
11. Unplug this product from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
(A) When the power supply cord or plug is
damaged or frayed.
(B) If the product has been exposed to rain,
water or liquid has been spilled on the product,
disconnect and allow the product to dry out to
see if it still operates; but do not open up the
product.
(C) If the product housing has been damaged.
(D) If the product exhibits a distinct change in
performance.
12. Avoid using a telephone during an
electrical storm. There may be a remote risk of
electric shock from lightning.
13. Do not use the telephone to report a gas
leak in the vicinity of the leak.
14.
CAUTION
: To eliminate the possibility
of accidental damage to cords, plugs, jacks,
and the telephone, do not use sharp
instruments during the assembly procedures.
15.
WARNING
: Do not insert the plug at the
free end of the handset cord directly into a wall
or baseboard jack. Such misuse can result in
unsafe sound levels or possible damage to the
handset.
16. Save these instructions.
This symbol on the product is used to identify
the following important information:
Shock Hazard Warning:
To avoid potential electrical shock hazard to
personnel or damage to the telephone, use only
the manufacturer supplied equipment and
installation procedures. Specifically, use only
6 conductor modular Teladapt plug/cords with
this product, and the AC transformer must be
CSA/UL or CSA-NRTL/C approved Class 2,
level C, rated as follows:
For North American Markets mains nominal
AC voltage 110-117V:
For Venture EFA- Input: 117/120VAC, 50/
60Hz, 12W and Output: 16VAC 500 mA.
For International Markets mains nominal AC
voltage 220-240V:
For Venture EFA- Input: 220/240VAC, 50/
60Hz, 12W and Output: 16VAC 500 mA.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (serving) instruction
in the literature accompanying
the product..
Comments to this Manuals