Aastra Pro 160 User's Guide download pdf (Page 1)

AastraLink Pro 160 User’s Quick Start Guide - Phone Setup

41-001134-04 REV 00

Identify Your Network Installation Option

For Ethernet networks that

DO NOT supply power to the phone:

- Use the 48V AC Power Adapter

to connect from the DC power port

on the phone to a power source.

- Use the Ethernet cable (supplied)

to connect from the phone to a

network jack.

For Ethernet networks

that supply in-line power to

the phone (IEEE 802.3af):

- Use the Ethernet cable (supplied)

to connect from the phone

directly to the network.

- No 48v AC power adapter

required.

For Ethernet networks that DO NOT

supply power to the phone:

- Use a Power over Ethernet (PoE)

power injector.

- Use the Ethernet cable (supplied)

to connect from the phone to the

PoE power injector.

- Use an additional Ethernet cable

from the PoE to the Network jack (not supplied).

NOTE: The optional PoE and Ethernet

cable are available from your Aastra

dealer as optional accessories

(p/n D0023-0031-00-00 and

p/n D0061-0065-00-00, respectively).

This quick start guide is designed to

help you quickly set up and use your

IP phone in an AastraLink Pro 160

network. The complete documentation

set is available online at:

http://www.aastratelecom.com/support

53i 55i

57i

Xfer

Conf

35i

Conf Services

Xfer Icom

ABC DEF

GHI JKL MNO

PQR S

TUV

WX Y Z

7 98

Goodbye

Options

Hold Redial

35i

Conf Services

Xfer Icom

ABC DEF

GHI JKL MNO

PQR S

TUV

WX Y Z

7 98

Goodbye

Options

Hold Redial

57i CT

Services

Save

Del

Swap

51i

Wall Mount

Drilling Template

asdassa

asdadsda

Handset

Cord

Mounting Template

and Hardware

Ethernet

Cable

Power Adapter

The 5i Models also have these:

Base Legs

Small Programmable

Key Card (53i)

Large Programmable

Key Card (55i)

The 9143i, 9480i, and 9480i CT Models also have these:

Base Stand

Programmable Key Card

and Plastic Lens (33i only)

9143i 9480i

9480i CT

Number Card

and Lens

The CT Models also have these:

Power Adapter

(for charging cradle)

Belt Clip

(for cordless

handset)

Battery

(for handset)

Charging Cradle

(for cordless

handset)

Install Your Phone on a Desktop or a Wall

To install the phone on a desk:

5i Series Phones

Attach each leg to the back of the phone by inserting the tabs on the leg into the

slots on the bottom of the phone. There are three pairs of leg slots on each corner

of the phone; each leg uses two pairs of slots when attached. (See Figure A)

There are a total of 4 viewing angles (by reversing the legs, the incline on the phone

can be changed). (See Figure B).

9143i, 9480i, 9480i CT Phones

1. Attach the stand by inserting the tabs on the stand (marked with ) into the slots

on the bottom of the phone. For a higher viewing angle, use the slots marked .

For a lower viewing angle, use the slots marked .

2. Push the stand towards the phone until it snaps into place. (See Figure C).

Figure B

Figure A

To install the phone on a wall:

1. Use the wall mount drilling template to locate and mark the position

for the mounting screws on the wall.

2. Drill the holes and insert the mounting screws (insert the wall anchors

before inserting the mounting screws if required).

3. Coil the cables into the spaces provided on the back of the phone.

4. Connect the Ethernet cable to the wall network jack.

5. Place the wall mount holes on the back of the phone over the screw

heads on the wall and pull down to lock the phone in.

NOTE: Before installing the phone on the wall, connect the handset cord to the handset;

connect the other end of the cord into the handset jack on the back of the phone. Use

steps 3 and 4 to connect all other cables to the phone. If you have a phone wall plate with

pegs already installed on your wall, skip steps 1 and 2. Refer to Figures D and E.

Figure C

Figure D

(5i Series Phones)

Figure E

(9143i, 9480i, 9480i CT Phones)

Connect the supplied Ethernet cable

to the port (on 9143i, 9480i, and

9480i CT phones) the LAN port (on 5i phones).

Connect the other end of the

Ethernet cable to the Ethernet

hub/switch or the network jack.

To Network

9143i, 9480i, 9480i CT Phones

5i Series Phones

To Network

9143i, 9480i, 9480i CT Phones

5i Series Phones

k WARNING: This will disconnect your network connection.

Connect the Ethernet cable from the phone to the Network Jack.

Reconnect the cable previously removed

in step "B" to the back of the phone

marked with ; (9143i, 9480i, 9480i CT phones)

Other Network Devices

To Other

Network Device

Connect Your Phone to the AastraLink Pro 160 Network

If you already have a network device, such as your computer,

connected to the Network Jack where you are installing the

phone, you will need to temporarily disconnect it from the

Network Jack.

To Other

Network Device

or PC (5i Series phones).

NOTE: The phone begins the startup process when power is first connected.

NOTE: If your Ethernet network DOES NOT

provide power to the phone (either from the

switch, or using an inline power injector),

you must use the supplied 48v AC adapter

to power the phone. Connect the 48v adapter

cable into the phone’s power connector and

plug the adapter into an AC power source.

Phone Powered by Inline

Power from the Network

Phone Powered by

48V AC Power Adapter

(Optional) Phone Powered

by PoE Power Injector

NOTE: Before installing the phone on the desk, connect the handset cord to the handset;

connect the other end of the cord into the handset jack on the back of the phone.

To install the cordless handset:

1. Attach the charging cradle power adapter to the

charging cradle and plug the other end into a

non-switched AC outlet. (Figure F)

2. Turn the cordless handset face down, remove the

back cover, and install the battery. (Figure G)

Replace cover.

3. (optional) Clip the belt clip onto the back of the phone.

Figure F

Figure G

Supported Aastra SIP IP Phone Models

Optional Aastra IP Phone Expansion Modules

536M

Provides up to 36 additional softkeys

to the 53i, 55i, 57i, and 57i CT

560M

Provides up to 60 additional softkeys

to the 55i, 57i, and 57i CT

SIP IP Phone Piece Parts

All models have these:

1 2

Summary of Contents

Page 1 - SIP IP Phone Piece Parts

AastraLink Pro 160 User’s Quick Start Guide - Phone Setup 41-001134-04 REV 00Identify Your Network Installation Option For Ethernet networks thatDO NO

Page 2 - IP Address:

AastraLink Pro 160 User’s Quick Start Guide - Account Registration For User Guides, Regulatory information, and Conformance Statements regarding this

Aastra Pro 160 User's Guide Page 1

Browse online or download User's Guide for IP phones Aastra Pro 160. Aastra Pro 160 User guide User Manual

Summary of Contents

More documents for IP phones Aastra Pro 160

Comments to this Manuals

Aastra Pro 160 User's Guide Page 1

Browse online or download User's Guide for IP phones Aastra Pro 160. Aastra Pro 160 User guide User Manual

Summary of Contents

More documents for IP phones Aastra Pro 160

Comments to this Manuals

Related products and manuals for IP phones Aastra Pro 160