Aastra IP User Manual download pdf (Page 5)

Model 480i SIP Admin Guide

2

Methods of Installation

Methods of Installation

The Þrmware set up and installation

for the 480i can be done through the

Options List available directly from

the phone or through the

Aastra 480i

Web Client

web interface. When the

480i is initialized for the Þrst time,

DHCP is enabled by default. The

DHCP server passes information to

the 480i so that it can conÞgure itself

for subsequent IP PBX addresses

and normal runtime operations.

The following considerations must

be made before connecting the 480i

phone to the network:

• If you are planning on using

Dynamic IP addresses, make sure

a DHCP server is running on

your network.

• If you are not planning on using

Dynamic IP addresses, refer to

the section “

ConÞguring the 480i

IP Phone

” on how to set up an

IP address manually.

• Make sure a TFTP server is set up

on your network and can accept

connections anonymously.

• Every PBX system that interacts

with the 480i phones requires

adherence to the SIP Standard.

To Þnd out how to hook up the

cabling to your 480i phone, please

refer to the

Aastra 480i Installation

Guide

.

480i IP Phone Set up

When the 480i is Þrst plugged in

or reset it will automatically

download any Þrmware updates

for the phone. The binary and

conÞguration Þles that are required

for the 480i are: “Þrmware.st”,

“aastra.cfg” and “<mac>.cfg”. The

settings of the 480i phone, as well

as the softkeys and the line keys,

can be conÞgured through the

conÞguration Þles. Please refer to

Appendix A for details on the

parameters that can be set for the

480i phone. Please refer to Appendix

B for sample conÞguration Þles

with all the basic parameters that

need to be set in order to register the

IP phone at the PBX.

The following steps illustrate a

typical 480i phone setup:

1.

If DHCP is disabled, manually

enter the TFTP server’s IP

address. For details on how to

set the TFTP server setting for the

480i, please refer to the section

“

ConÞguring the 480i IP Phone

”.

2.

Copy the Þrmware Þle

“Þrmware.st” to the root directory

of the TFTP server. This Þrmware

Þle is downloaded only when it

is different than the one the phone

is currently using.

3.

Copy the Aastra conÞguration

Þle “aastra.cfg” and “<mac>.cfg”

Þle to the root directory of the

TFTP server.

Note:

<mac> represents the actual MAC

address of your phone which must

be input ie 00085D030996.cfg

1 2 3 4 5 6 7 8 9 10 ... 40 41

Comments to this Manuals

No comments