Quick Setup Guide Integration of Aastra MX-ONE™ / Aastra 700 and Microsoft® Lync Server™ 2010 Aastra MX-ONETM and Aas
10 (19) • Publish the topology Figure 6 - Publish topology Define a Dial Plan The Dial Plan configuration is required to allow Lync users to dia
11 (19) Define Voice Policy A voice policy is required to make possible Lync users to dial out via the Direct SIP connection using MX-ONE. Lync clie
12 (19) • Define a name and description for this New Route • Associate the MX-ONE gateway created previously with this New Route, to do it click
13 (19) • In the Select Gateway select the MX-ONE gateway created previously • Click OK for all questions in order to keep the configurations • C
14 (19) • Select the Encryption support level, in this case, Not supported Figure 12 - Encryption support level • Commit all changes Now the s
15 (19) SIP Route definition Define SIP route category: ROCAI:ROU=98,SEL=7110000000000010,SIG=0111110000A0,TRAF=03151515,TRM=4,SERV=3100000001,BCAP
16 (19) • Click in New, the Define New IP/PSTN Gateway dialog box appears, type the following: • Gateway FQDN or IP Address: specify the MX-ONE IP
17 (19) Define Trunk Configuration In order to assign the MX-ONE gateway to a site or pool trunk execute the following: • Click in Voice Routing a
18 (19) 5 Integration Notes Please note that the following scenarios are currently not supported when MX-ONE is integrated with Lync Server: • REFER
19 (19) -----------------------------------------------------------------------------------------------------------------------© 2011 Aastra Technol
2 (19) Contents 1 Introduction ... 31
3 (19) 1 Introduction Aastra MX-ONE and Aastra 700 communications systems running Telephony Server software V.4.1 SP3 or later can be integrated wi
4 (19) 2 Integration Description The integration of Aastra MX-ONEand Microsoft Lync Server 2010 described in this guide is achieved via Direct SIP.
5 (19) 2.2 Direct SIP signalling overview Aastra MX-ONE supports SIP/TCP or SIP/TLS as the SIP transport mechanism when connected with Mediation Ser
6 (19) 3 Prerequisites In order to have the proper integration between Aastra MX-ONE and Microsoft Lync Server using Direct SIP, there are some prer
7 (19) 4 Installation and configuration 4.1 Installation 4.1.1 MX-ONE Installation It is assumed that MX-ONE Telephony Server software V.4.1 SP3 o
8 (19) 1) MX-ONE Direct SIP setup The figure below shows the Direct SIP configuration used in this guide: MX-ONE or A700 V.4.1 SP3IP= 192.168.222
9 (19) 2) Lync Server 2010 configuration In order to finalize the configuration between Aastra MX-ONE and Microsoft Lync Server 2010 the following
Comments to this Manuals